TM 9-2320-366-20-4
16-9. AIR SPRING AND BRACKET REPLACEMENT (CONT)
(10) Remove three self-locking nuts (18), washers (19), and
screws (20) from mounting bracket (2). Discard self-
locking nuts.
(11) Remove self-locking nut (21), washer (22), screw (23),
and mounting bracket (2) from left frame rail (24).
Discard self-locking nut.
d. Left Air Spring and Bracket Installation.
(1) Position mounting bracket (1) on left frame rail (2) with
screw (3), washer (4), and self-locking nut (5).
(2) Position three screws (6), washers (7), and self-locking
nuts (8) in mounting bracket (1).
NOTE
Step (2.1 and 3) requires the aid of an assistant.
(2.1) Rotate mounting bracket (1) counterclockwise to the
maximum angle permitted by mounting hole clearance.
(3) Tighten self-locking nut (5) and three self-locking nuts (8)
to 58-76 lb-ft (79-103 Nm).
16-74
Change 1
