TM 9-2320-366-20-4
WARNING
Adhesives, solvents, and sealing com-
pounds can burn easily, can give off
harmful vapors, and are harmful to skin
and clothing. Keep away from open fire
and use in a well-ventilated area. If
adhesive, solvent, or sealing compound
gets on skin or clothing, wash
immediately with soap and water. Failure
to comply may result in injury to
personnel.
(4) Apply antiseize compound to threads of nipple (9) and
90-degree fitting (9.1).
(5) Install nipple (9) in air spring (10).
(5.1) Install 90-degree fitting (9.1) on nipple (9).
(6) Position air spring (10) on rear cab support assembly
(11) with four screws (12) and self-locking nuts (13).
NOTE
Step (7) requires the aid of an assistant.
(7) Tighten four self-locking nuts (13) to 45-61 lb-ft (61-83
Nm).
(8) Position four screws (14) and self-locking nuts (15) in air
spring (10).
(9) Connect air hose (16) to 90-degree fitting (9.1).
(10) Lower cab (TM 9-2320-366-10-1).
(11) Inflate cab air springs (TM 9-2320-366-10-1).
NOTE
Step (12) requires the aid of an assistant.
(12) Tighten four self-locking nuts (15) to 45-61 lb-ft (61-83
Nm).
Change 1
