TM 9-2320-366-20-4
NOTE
Steps (2) through (4) require the aid of an
assistant.
(2) Remove two self-locking nuts (6), and bolts (7) from
underplate (5). Discard self-locking nuts.
(3) Remove nut (8), lockwasher (9), and bolt (10) from
underplate (5). Discard lockwasher.
(4) Remove nut (11), lockwasher (12) and bolt (13) from
underplate (5). Discard lockwasher.
b. Underplate Installation.
NOTE
Steps (1) through (3) require the aid of an
assistant.
(1) Position underplate (1) on vehicle with lockwasher (2),
bolt (3) and nut (4).
(2) Position lockwasher (5), bolt (6), and nut (7) in
underplate (1).
(3) Position two bolts (8) and self-locking nuts (9) in
underplate (1).
(4) Tighten nuts (4), (7), and two self-locking nuts (9) to 36-
43 lb-ft (49-58 Nm).
16-79
