TM 9-2320-366-20-4
g. Right Rear Bracket Removal.
(1) Remove self-locking nut (1), two washers (2), and screw
(3) from bracket (4). Discard self-locking nut.
(2) Remove nut (5), screw (6), and washer (7) and bracket
(4) from vehicle. Discard lockwasher.
h. Right Rear Bracket Installation.
(1) Install bracket (1) on vehicle with lockwasher (2), screw
(3), and nut (4) in bracket (1).
(2) Position screw (5), two washers (6), and self-locking nut
(7) in bracket (1).
(3) Tighten self-locking nut (7) to 36-42 lb-ft (49-58 Nm).
i.
Splash Guard Removal.
(1) Remove three self-locking nuts (1), six washers (2),
three screws (3), and guard support (4) from splash
guard (5). Discard self-locking nuts.
16-83
