TM 9-2320-366-20-4
16-9. AIR SPRING AND BRACKET REPLACEMENT (CONT)
(13) Remove rear cab support assembly (11) from
spare tire retainer (17).
NOTE
Dimension measured in step (14) should be
11.75-11.94 in. (298.5-303.5 mm).
If
measurement recorded in step (14) is not
within limits, perform cab leveling valve
adjustment (para 16-8) prior to installing
stoneguard.
(14) Measure distance from top surface of mounting
bracket (1) to top edge of air spring (10).
(15) Position stoneguard (18) on air spring (10) with two
washers (19) and screws (20).
(16) Position washer (21) and screw (22) in stoneguard
(18).
(17) Tighten two screws (20) and screw (22) to 48-72 lb-
in. (5-8 Nm).
Change 2
