TM 9-2320-366-20-4
h. Door Lower-Half Installation.
NOTE
Left and right door lower-halves are installed
the same way. Right side shown.
(1) Position hinge (1) on cab with two washers (2) and
screws (3).
(2) Position hinge (4) on cab with two washers (5) and
screws (6).
(2.1) Position hinges (1 and 4) so that remaining three
bolt holes in cab are centered in square holes in
hinges as shown.
(2.2) Tighten two screws (3 and 6) to 22-26 lb ft (30-34
Nm).
(2.3) Position three washers (2 and 5) and screws (3 and
6) in hinges (1 and 4).
(2.4) Tighten three screws (3 and 6) to 22-26 lb ft (30-34
Nm).
Change 2