TM 9-2320-366-20-4
NOTE
Note position and orientation of fittings prior
to removal.
(6) Remove fitting (2) from tee fitting (8).
(7) Remove 90-degree fitting (4) from bushing (9).
(8) Remove bushing (9) from tee fitting (8).
(9) Remove tee fitting (8) from pressure protection valve (5).
(10) Remove pipe nipple (10) from pressure protection valve
(5).
b. Pressure Protection Valve Installation (All Models
Except M1089/M1090/M1094).
WARNING
Adhesives, solvents, and sealing com-
pounds can burn easily, can give off
harmful vapors, and are harmful to skin
and clothing. Keep away from open fire
and use in a well-ventilated area. If
adhesive, solvent, or sealing compound
gets on skin or clothing, wash
immediately with soap and water. Failure
to comply may result in injury to
personnel.
(1) Apply antiseize compound to threads of pipe nipple (1).
(2) Install pipe nipple (1) in pressure protection valve (2).
(3) Apply antiseize compound to threads of tee fitting (3).
(4) Install tee fitting (3) in pressure protection valve (2).
11-171
