TM 9-2320-366-20-4
WARNING
Adhesives, solvents, and sealing compounds can burn easily, can give off harmful vapors, and are
harmful to skin and clothing. Keep away from open fire and use in a well-ventilated area. If
adhesive, solvent, or sealing compound gets on skin or clothing, wash immediately with soap and
water. Failure to comply may result in injury to personnel.
NOTE
Perform steps
(3)
through
(6)
on
M1088/M1089.
(3) Apply antiseize compound to threads of 90-degree fitting
(3), one-way check valve (4), and branch tee fitting (5).
(4) Install 90-degree fitting (3) in primary air tank (2).
(5) Install one-way check valve (4) in 90-degree fitting (3).
(6) Install branch tee fitting (5) in one-way check valve (4).
NOTE
Perform steps (7) through (9) on all models
except M1088/M1089.
(7) Apply antiseize compound to threads of one-way check
valve (4) and branch tee fitting (5).
(8) Install one-way check valve (4) in primary air tank (2).
(9) Install branch tee fitting (5) in one-way check valve (4).
(10) Apply antiseize compound to threads of branch tee
fittings (6 and 7).
(11) Install branch tee fitting (6) in primary air tank (2).
(12) Install tee fitting (7) in primary air tank (2).
11-149
