TM 9-2320-366-20-4
This task covers:
a. Removal
c. Follow-On Maintenance
b. Installation
INITIAL SETUP
Equipment Conditions
Materials/Parts
Engine shut down (TM 9-2320-366-10-1).
Antiseize Compound (Item 58, Appendix D)
Air tanks drained (TM 9-2320-366-10-1).
Ties, Cable, Plastic (Item 69, Appendix D)
Damping Fluid (Item 19, Appendix D)
Filter Element (Item 15, Appendix G)
Tools and Special Tools
Goggles, Industrial (Item 15, Appendix C)
Packing, Preformed (Item 192, Appendix G)
Tool Kit, Genl Mech (Item 46, Appendix C)
Lockwasher (Item 70, Appendix G)
WARNING
Wear appropriate eye protection when
working under vehicle due to the
possibility of falling debris. Failure to
comply may result in injury to personnel.
a. Removal.
NOTE
Both front gladhands are removed the same
way. Service gladhand shown.
Remove plastic cable ties as required.
(1) Remove dummy coupling (1) from gladhand (2).
(2) Remove dummy coupling chain (3) from mounting
bracket (4).
(3) Remove gladhand (2) and reducer fitting (5) from
adapter (6).
NOTE
Note orientation of preformed packing and
filter prior to removal.
(4) Remove reducer (5), preformed packing (7), and filter (8)
from gladhand (2). Discard filter and preformed packing.
Change 1
