TM 9-2320-366-20-4
This task covers:
a. Removal
c. Follow-On Maintenance
b. Installation
INITIAL SETUP
Equipment Conditions
Materials/Parts
Engine shut down (TM 9-2320-366-10-1).
Dispenser, Pressure Sensitive Adhesive Tape
Air tanks drained (TM 9-2320-366-10-1).
(Item 20, Appendix D)
Antiseize Compound (Item 58, Appendix D)
Nut, Self-Locking (2) (Item 167, Appendix G)
Tools and Special Tools
Tool Kit, Genl Mech (Item 46, Appendix C)
Goggles, Industrial (Item 15, Appendix C)
Wrench, Torque, 0-175 lb-ft (Item 58, Appendix C)
WARNING
Wear appropriate eye protection when
working under vehicle due to the
possibility or falling debris. Failure to
comply may result in injury to personnel.
a. Removal.
NOTE
On M1089 the panel is located directly below
main winches.
Tag air hoses and connection points prior to
disconnecting.
(1) Disconnect two air hoses (1) from 90-degree fittings (2).
(2) Disconnect two air hoses (3) from tee fittings (4).
Change 1
