TM 9-2320-366-20-4
WARNING
Adhesives, solvents, and sealing com-
pounds can burn easily, can give off
harmful vapors, and are harmful to skin
and clothing. Keep away from open fire
and use in a well-ventilated area. If
adhesive, solvent, or sealing compound
gets on skin or clothing, wash
immediately with soap and water. Failure
to comply may result in injury to
personnel.
(36) Apply antiseize compound to threads of two 90-degree
fittings (10 and 13).
(37) Install 90-degree fitting (13) in left rear service brake air
chamber (11).
(38) Connect center air hose (12) to 90-degree fitting (13).
(39) Install 90-degree fitting (10) in left rear service brake air
chamber (11).
(40) Connect air hose (9) to 90-degree fitting (10).
f.
Follow-On Maintenance.
(1) Start engine (TM 9-2320-366-10-1) and allow time for air
pressure to build to normal operating pressure.
(2) Shut down engine (TM 9-2320-366-10-1).
(3) Check around load sensing valve, air hoses and fittings
for air leaks.
(4) Start engine (TM 9-2320-366-10-1).
(5) Road test vehicle and check for proper brake operation.
(6) Shut down engine (TM 9-2320-366-10-1).
End of Task.
Change 1
11-69
