TM 9-2320-366-20-4
(2) Loosen two screws (4) on load averaging channel
mounting springs (5).
(3) Remove two screws (4) and load averaging channel (3)
from load averaging channel mounting springs (5).
(4) Remove two screws (6), and load averaging channel
mounting springs (5) from intermediate axle (8) and rear
axle (9).
b. Installation.
WARNING
Adhesive Sealant MIL-S-46163 can
damage your eyes.
Wear safety
goggles/glasses when using; avoid
contact with eyes. If sealant contacts
eyes, flush eyes with water and get
immediate medical attention. Failure to
comply may result in injury to personnel.
(1) Apply adhesive to threads of two screws (1).
(2) Position two load averaging channel mounting springs
(2) on intermediate axle (3) and rear axle (4) with two
and screws (1).
Change 1
11-71
