TM 9-2320-366-20-4
11-8. REAR BRAKE AIR CHAMBER REPLACEMENT (CONT)
(19) Install collet nut (10) on rear air chamber (11) to bottom
of threads.
WARNING
Adhesives, solvents, and sealing com-
pounds can burn easily, can give off
harmful vapors, and are harmful to skin
and clothing. Keep away from open fire
and use in a well-ventilated area. If
adhesive, solvent, or sealing compound
gets on skin or clothing, wash
immediately with soap and water. Failure
to comply may result in injury to
personnel.
(20) Apply sealing compound to threads of rear air chamber
(11).
WARNING
Ensure rear air chamber is caged prior to
installation. Failure to comply may result
in injury to personnel.
(21) Install rear air chamber (11) in plunger housing (12) until
it bottoms.
CAUTION
Loosen rear air chamber no more than one
full turn. Failure to comply may result in
damage to equipment.
(22) Tighten collet nut (10) against plunger housing (12).
