TM 9-2320-366-20-4
WARNING
Adhesives, solvents, and sealing com-
pounds can burn easily, can give off
harmful vapors, and are harmful to skin
and clothing. Keep away from open fire
and use in a well-ventilated area. If
adhesive, solvent, or sealing compound
gets on skin or clothing, wash
immediately with soap and water. Failure
to comply may result in injury to
personnel.
NOTE
Perform steps (23) through (30) on M1088 and
M1089, and vehicle serial numbers 2451 and
higher.
Clean fittings and rear air chamber of all sealing
compound residue prior to installation.
(23) Apply sealing compound to threads of two adapters (13).
(24) Install two adapters (13) in rear air chamber (11).
(25) Apply sealing compound to threads of tee fittings (14 and
15).
(26) Install tee fittings (14 and 15) in two adapters (13).
(27) Apply sealing compound to threads of adapter (16).
(28) Install adapter (16) in rear air chamber (11).
(29) Apply sealing compound to threads of tee fitting (17).
(30) Install tee fitting (17) in adapter (16).
11-45
