TM 9-2320-366-20-4
This task covers:
a. Removal
d. Installation
b. Disassembly
e. Follow-On Maintenance
c. Assembly
INITIAL SETUP
Equipment Conditions
Materials/Parts
Air tanks drained (TM 9-2320-366-10-1).
Dispenser, Pressure Sensitive Adhesive Tape
Instrument panel assembly removed for access (para
(Item 20, Appendix D)
7-15).
Ties, Cable, Plastic (Item 69, Appendix D)
Antiseize Compound (Item 58, Appendix D)
Lockwasher (4) (Item 93, Appendix G)
Tools and Special Tools
Tool Kit, Genl Mech (Item 46, Appendix C)
Nut, Self-Locking (8) (Item 166, Appendix G)
Wrench, Torque, 0-175 lb-ft (Item 58, Appendix C)
Pin, Cotter (Item 225, Appendix G)
Grease (Item 24, Appendix D)
Personnel Required
(2)
a. Removal.
NOTE
Tag terminal lugs and connection points prior
to removal.
(1) Remove two nuts (1), lockwashers (2), and terminal lugs
TL152 (3), and TL153 (4) from rear stoplight switch (5).
Discard lockwashers.
(2) Remove two nuts (6), lockwashers (7), and terminal lugs
TL154 (8), and TL155 (9) from front stoplight switch (10).
Discard lockwashers.
(3) Remove stoplight switches (5 and 10) from foot control
valve (11).
Change 1
