TM 9-2320-366-20-4
NOTE
Save rubber cap for use after uncaging
operation to seal spring brake chamber.
(3) Remove rubber cap (10) from spring brake chamber
(11).
(4) Insert T-end of caging bolt (3) in back of spring brake
chamber (11).
(5) Lock caging bolt (3) in place by turning caging bolt to the
right 1/4 turn.
(6) Position washer (2) and nut (1) on caging bolt (3).
(7) Tighten nut (1) until brakes are fully released, wheel
turns freely.
Change 1
11-31
