TM 9-2320-366-20-4
11-5. REAR BRAKE PLUNGER ASSEMBLY REPLACEMENT/REPAIR (CONT)
c. Cleaning/Inspection.
WARNING
Dry Cleaning Solvent (P-D-680) is TOXIC and flammable. Wear protective goggles and gloves;
use only in well ventilated area; avoid contact with skin, eyes, and clothes, and do not breathe
vapors. Keep away from heat or flame. Never smoke when using solvent; the flashpoint for
Type I Dry Cleaning Solvent is 100F (38C) and for Type II is 130F (50C). Failure to comply
may result in serious injury or death to personnel.
If personnel become dizzy while using Dry Cleaning Solvent, immediately get fresh air and
medical help. If Dry Cleaning Solvent contacts skin or clothes, flush with cold water. If Dry
Cleaning Solvent contacts eyes, immediately flush eyes with water and get immediate medical
attention. Failure to comply may result in injury to personnel.
(1) Clean all metal parts thoroughly with dry cleaning solvent.
NOTE
Replace plungers, sleeves, screws, springs,
and pawls as a unit.
(2) Inspect adjusting plunger (1), adjusting sleeve (2), and
adjusting screw (3) for damage.
(3) Inspect screw (4), spring (5), and adjusting pawl (6) for
damage.
(4) Inspect anchor plunger (7) and guide screw (8) for
damage.
(5) Inspect rollers (9) for freedom of movement, and pitting
or cracks.
(6) Inspect spring (10) for cracks, distortion, or corrosion.
(7) Inspect rubber (11) for deterioration or damage.
11-26
