TM 9-2320-366-20-4
This task covers:
a. Draining
c. Follow-On Maintenance
b. Filling
INITIAL SETUP
Equipment Conditions
Material/Parts
Engine shut down (TM 9-2320-366-10-1).
Sealing, Compound (Item 57, Appendix D)
Oil, Lubricating, Gear, GO 75W (Item 39,
Tools and Special Tools
Tool Kit, Genl Mech (Item 46, Appendix C)
Sealing Compound (Item 55, Appendix D)
Wrench, Torque, 0-175 lb-ft (Item 58, Appendix C)
Pan, Drain (Item 24, Appendix C)
Goggles, Industrial (Item 15, Appendix C)
WARNING
Wear appropriate eye protection when
working under vehicle due to the
possibility of falling debris. Failure to
comply may result in injury to personnel.
a. Draining.
NOTE
Left and right bogie covers are removed the
same way. Left cover shown.
(1) Match mark cover (1) to bogie housing (2).
(2) Place drain pan under bogie housing (2).
(3) Remove six screws (3) and cover (1) from bogie housing
(2).
