TM 9-2320-366-20-4
This task covers:
a. Removal
c. Follow-On Maintenance
b. Installation
INITIAL SETUP
Equipment Conditions
Tools and Special Tools (Cont)
Engine shut down (TM 9-2320-366-10-1).
Pan, Drain (Item 24, Appendix C)
Tools and Special Tools
Materials/Parts
Tool Kit, Genl Mech (Item 46, Appendix C)
Nut, Self-Locking (Item 150, Appendix G)
Goggles, Industrial (Item 15, Appendix C)
WARNING
Wear appropriate eye protection when
working under vehicle due to the possibility
of falling debris. Failure to comply may
result in injury to personnel.
Ensure exhaust system is cool before
performing maintenance. Failure to comply
may result in injury to personnel.
NOTE
If transmission oil cooler tube is damaged,
refer to paragraphs 8-23 or 8-24.
a. Removal.
(1) Place drain pan under oil cooler tube (1).
(2) Disconnect oil cooler tube (1) from 90-degree fitting (2).
Change 1
