TM 9-2320-366-20-4
NOTE
Remove plastic cable ties as required.
(2) Remove four screws (4), washers (5), transmission oil
cooler hose bracket (6), flywheel cover (7), and gasket
(8) from flywheel housing (9). Discard gasket.
(3) Remove four self-locking nuts (10), screws (11), and
clamps (12) from transmission oil cooler hose bracket
(6). Discard self-locking nuts.
(4) Remove four clamps (12) from transmission oil cooler
hoses (13 and 14).
(5) Place drain pan under transmission (15).
(6) Disconnect transmission oil cooler hose (13) from 90-
degree fitting (16).
(7) Remove preformed packing (17) from 90-degree fitting
(16). Discard preformed packing.
Change 1
8-127
