TM 9-2320-366-20-4
NOTE
Left front and rear brackets are installed the
same way. Left front bracket shown.
(13) Position two spacers (23), spacers (24), and left front
bracket (25) on bracket (9) with screw (26) and self-
locking nut (27).
(14) Position washer (28), screw (29), washer (30),
lockwasher (31), and self-locking nut (32) on bracket
(25).
(15) Tighten self-locking nuts (27 and 32) to 20-30 lb-ft (27-
41 Nm).
(16) Perform steps (13) through (15) on left rear bracket.
(17) Connect connector J209 (33) to connector P209 (34).
(18) Connect connector clamp (35) on connector P209 (34).
(19) Position right splash shield (36) on vehicle with five
washers (37), screws (38), and self-locking nuts (39).
NOTE
Step (20) requires the aid of an assistant.
(20) Tighten five self-locking nuts (39) to 20-30 lb-ft (27-41
Nm).
Change 1