TM 9-2320-366-20-4
This task covers:
a. Removal
c. Follow-On Maintenance
b. Installation
INITIAL SETUP
Equipment Conditions
Materials/Parts
MHC erected (TM 9-2320-366-10-2).
Dispenser, Pressure Sensitive Adhesive Tape
Engine shut down (TM 9-2320-366-10-1).
(Item 20, Appendix D)
Batteries disconnected (para 7-57).
Ties, Cable, Plastic (Item 69, Appendix D)
Varnish, Oil (Item 70, Appendix D)
Tools and Special Tools
Tool Kit, Genl Mech (Item 46, Appendix C)
Tool Kit, Electrical (Item 45, Appendix C)
a. Removal.
NOTE
Remove plastic cable ties as required.
(1) Disconnect connector (1) from overload shutdown (2).
(2) Loosen four screws (3) on junction box (4).
(3) Open cover (5) on junction box (4).
