TM 9-2320-366-20-4
7-116. M1089 OVERLOAD LOCKOUT CABLE REPLACEMENT (CONT)
b. Installation.
(1) Install overload lockout cable (1) through clamp (2),
compression nut (3), and connector (4).
(2) Install compression nut (3) on connector (4).
(3) Tighten two screws (5) on clamp (2).
(4) Install quick disconnect terminal (6) on green wire (7).
(5) Install terminal lug (8) on black wire (9).
(6) Install terminal lug (10) on red wire (11).
(7) Install terminal lug (12) on white wire (13).
(8) Install quick disconnect terminal (6) on ground strip (14)
position 5.
(9) Install terminal lug (8) on terminal block (15) position 1
with screw (16).
(10) Install terminal lug (10) on terminal block (15) position 17
with screw (16).
(11) Install terminal lug (12) on terminal block (15) position 19
with screw (16).
(12) Apply varnish to quick disconnect terminal (6) and
terminal lugs (8, 10, and 12).
7-580
