TM 9-2320-366-20-4
NOTE
Tag wires and connection points prior to
disconnecting.
(6) Remove 12 screws (9) from terminal block (10) positions
7 through 18.
(7) Disconnect quick disconnect terminal (11) from ground
strip (12) position 7.
(8) Remove four nuts (13), lockwashers (14), screws (15),
and left side remote control cable (16) from junction box
(7). Discard lockwashers.
b. Installation.
(1) Install left side remote control cable (1) in junction box
(2) with four screws (3), lockwashers (4), and nuts (5).
7-575