TM 9-2320-260-34-2
16-49. DRIVE REPAIR
THIS TASK COVERS:
a. Disassembly
c. Assembly
b. Cleaning, Inspection, and Repair
APPLICABLE MODELS
MATERIALS/PARTS (Contd)
M816
Two woodruff keys (Appendix D, Item 550)
Gasket (Appendix D, Item 102)
TOOLS
Gear oil (Appendix C, Item 22)
General mechanic's tool kit
Antiseize tape (Appendix C, Item 50)
(Appendix B, Item 1)
REFERENCES (TM)
Soft-head hammer (Appendix B, Item 47)
Arbor press (Appendix B, Item 7)
TM 9-2320-260-34P-2
MATERIALS/PARTS
EQUIPMENT CONDITION
Power drive removed (para. 16-47).
Lockwasher (Appendix D, Item 224)
Four lockwashers (Appendix D, Item 215)
a. Disassembly
1.
Remove screw (8), lockwasher (7), and washer (6) from shaft (12). Discard Iockwasher (7).
2.
Remove flange (5) from shaft (12).
Remove retaining ring (14) from housing (1).
3.
4.
Remove four screws (9), Iockwashers (10), housing (4), and gasket (3) from housing (1). Discard
gasket (3) and lockwashers (10).
Press shaft (12) and front bearing (13) out of housing (1).
5.
6.
Remove shaft (12) and rear bearing (2) from housing (4).
7.
Remove two woodruff keys (11) from shaft (12). Discard woodruff keys (11).
Press bearing (2) and (13) from shaft (12).
8.
16-296
