TM 9-2320-260-34-2
16-8. REAR WINCH REPAIR (Contd)
8.
Remove grease fitting (8) from end frame (7).
9.
Remove end frame (7) from shaft (3).
10.
Remove drum (6) from shaft (3).
11.
Remove seal (4) and thrust washer (5) from drum (6). Discard seal (4).
12.
Remove two woodruff keys (2) from shaft (3). Discard woodruff keys (2).
13.
Remove two screws (14), six screws (15), lockwashers (16), end cover (17), and gasket (13) from
gearcase (1). Discard Iockwashers (16) and gasket (13).
14.
Remove key washer (12) from shaft (3).
15.
Remove four screws (9), lockwashers (10), bearing cap (19), and gasket (11) from gearcase (1).
Discard lockwashers ( 10) and gasket (11).
16.
Remove seal (18) from bearing cap (19). Discard seal (18).
16-46