TM 9-2320-260-34-2
16-8. REAR WINCH REPAIR (Contd)
7. Using arbor press, remove bushing (13) from cover (12). Discard bushing (13).
8. Using arbor press, install new bushing (13) in cover (12).
9. Inspect end frame (8) for cracks, breaks, damaged or missing pin (15), damaged threads, and scoring
on seal surface (14). Repair or replace end frame (8) if worn or damaged. Replace pin (15)
if missing or damaged.
Table16-6. Rear Winch Parts Wear Limits.
WEAR LIMITS/TOLERANCES
ITEM/POINT OF MEASUREMENT
No.
INCHES
MILLIMETERS
2
Gearcase
76.33
3.006
Bushing - inner diameter - maximum
9
130.025
5.1191
10
Bearing bores - inner diameter - maximum
2.998
76.15
11
Shaft (3 places) - outer diameter-minimum
Cover
12
82.58
3.251
Bushing - inner diameter - maximum
13
16-49
