TM 9-2320-260-34-2
16-6. FRONT WINCH DRAG BRAKE REPLACEMENT
THIS TASK COVERS:
b. Installation
a. Removal
INITIAL SETUP
REFERENCES (TM)
APPLICABLE MODELS
TM 9-2320-260-20
All
TM 9-2320-260-34P-2
TOOLS
General mechanic's tool kit
q Front winch removed (TM 9-2320-260-20).
(Appendix B, Item 1)
q Level wind removed (if installed) (para. 16-3).
MATERIALS/PARTS
q Roller and cable tensioner removed (if installed)
Four lockwashers (Appendix D, Item 219)
Four lockwashers (Appendix D, Item 218)
q Roller removed (if installed) (para. 16-5).
NOTE
Perform steps 1 and 2 if front winch is not equipped with level
wind mechanism.
1. Remove four screws (2), Iockwashers (3), and top channel (1) from end frame (8) and gearcase (4).
Discard lockwashers (3).
2. Remove four screws (6), lockwashers (5), and side channel (7) from end frame (8) and gearcase (4).
Discard lockwashers (5).
16-41
