TM 9-2320-240-34-2
16-8. REAR WINCH REPAIR (Contd)
17.
Remove six screw-assembled lockwashers (31), cover (32), and gasket (30) from brake housing (22).
Discard gasket (30) and screw-assembled Iockwashers (31).
18.
Remove adjusting screw (36), washer (35), O-ring (34), and spring (33) from brake housing (22).
Discard O-ring (34).
19.
Remove brake band (29) from brakedrum (25).
20.
Remove screw (28), lockwasher (27), and washer (26) from wormshaft (20). Discard lockwasher (27),
21.
Using puller, remove brakedrum (25) from wormshaft (20).
22.
Remove woodruff key (38) from wormshaft (20). Discard woodruff key (38).
23.
Remove four screws (24), lockwashers (23), brake housing (22), and gasket (21) from gearcase (1).
Discard lockwashers (23) and gasket (21).
24.
Remove seal (37) from brake housing (22). Discard seal (37).
25.
Tap wormshaft (20) with soft-head hammer until front and rear bearings are unseated and
worm (41) drops away from worm gear (39).
26.
Remove worm gear (39), shaft (3), and thrust washer (40) from gearcase (1).
27.
Remove thrust washer (40) from shaft (3).
16-47
