TM 9-2320-211-20
Section XXXV. MAINTENANCE OF BODY,
CAB, AND HOOD
2-235. General
Components discussed in this section include the
brush guard, the cab top frame, the windshield
assembly, the cab seat cushions, and the cargo
body. The cargo body is an open top metal unit
mounted behind the cab on the frame. Removable
front and side cargo racks include sockets for six
top bows which support a tarpaulin cover for the
cargo area. Also incorporated in the cargo racks are
troop seats that can be lowered. These are sup-
ported by hinged legs. The spare tire is mounted on
a bracket at the forward end of the cargo body.
2-236. Brush guard
a. Removal (fig. 2-218).
(1) Unscrew the two brace nuts. Remove the
b. Installation (fig. 2-218).
nuts and bolts.
(1) Position the brush guard and secure it
(2) Remove the two mounting bolts. Pull the
with two mounting bolts.
b r u s h guard forward, a n d remove it from the
(2) Secure the guard to braces with two bolts
vehicle.
and nuts. Tighten all bolts and nuts securing the
guard to the vehicle.
2-237. Cab Top Frame
a. Removal (fig. 2-219).
(1) Remove the cab top tarpaulin as described
i n TM 9-2320-211-10.
(2) Disengage both cab roof rails from the
windshield frame.
(3) Turn the rails in and then down on the
hinge at the lock pillar post.
(4) Loosen the thumb screw at both pillar
posts. Lift the pillar posts and bow assembly from
sockets.
(5) Remove the crossbars from the bows.
