Figure 2-156. Adjusting headlight

TM 9-2320-211-20

Figure 2-156. Adjusting headlight.

Figure 2-157. Headlight aiming diagram.

2-136. Parking lights

parking light assembly. The third lamp is

a . Removal (fig. 2 - 1 5 8 ) .

for use as a directional lamp on some

models.

(1) Remove six screws securing the parking

b. Installation (fig. 2 - 1 5 8 ) .

light door to the light body.

(1) Insert the base of the lamp in the socket.

(2) Remove the parking light door and the

and turn the lamp clockwise to lock it in the socket.

preformed door seal.

(2) operate the light switch to test the lights.

(3) Push the lamp in and turn it coun-

(3) Install the preformed packing in the

terclockwise to remove the defective lamp from the

socket.

groove in the parking light door; position the door

and secure it with six screws.

NOTE

Three lamps are installed inside each