TM 9-2320-366-20-5
22-5. WARNING LIGHT CABLE ASSEMBLY REPLACEMENT (CONT)
NOTE
Remove plastic cable ties as required.
(7) Disconnect terminal lug TL14 (10) from terminal board
TB2 (11) position 12.
(8) Disconnect connector J65 (12) from connector P65 (13).
NOTE
Note routing of warning light cable assembly
prior to removal.
(9) Remove warning light cable assembly (14) from cab (4).
b. Installation.
(1) Position warning light cable assembly (1) in cab (2).
(2) Connect connector P65 (3) to connector J65 (4).
22-22
