TM 9-2320-366-20-5
NOTE
Install plastic cable ties as required.
(3) Connect terminal lug TL14 (5) to terminal board TB2 (6)
position 12.
(4) Position PDP (7) on dashboard (8).
(5) Install three screws (9) in PDP (7).
(6) Install three washers (10) and screws (11) in PDP (7).
(7) Install connector J62 (12) in cab (2) with three screws
(13).
(8) Install dustcap (14) on cab (2) with screw (15).
(9) Install dustcap (14) on connector J62 (12).
22-23
