TM 9-2320-366-20-5
(2) Install six clamps (3) on M1089 warning lights cable
assembly (2).
(3) Position M1089 warning lights cable assembly (2) on cab
(4) with six clamps (3), clamp halves (5), clamp halves
(6), washers (7), screws (8), washers (9), washers (10),
and self-locking nuts (11).
(4) Tighten six self-locking nuts (11) to 26-32 lb-ft (35-43
Nm).
(5) Install clamp (12) on M1089 warning lights cable
assembly (2).
(6) Position clamp (12), clamp half (13), and clamp half (14)
on cab (4) with washer (15), screw (16), washer (17),
washer (18), and self-locking nut (19).
(7) Tighten self-locking nut (19) to 26-32 lb-ft (35-43 Nm).
22-19
