TM 9-2320-366-20-5
This task covers:
a. Installation
INITIAL SETUP
Equipment Conditions
Tools and Special Tools
Engine shut down (TM 9-2320-366-10-1)
a.
Installation
NOTE
Slotted hole in rim cover is aligned with
pressure valve extension.
(1)
Position rim cover (1) on wheel (2) with four washers
(3) and bolts (4).
(2)
Tighten four bolts (1) to 71-95 lb-ft (96-128 Nm).
End of Task.
Change 2