TM 9-2320-366-20-5
Section II. MAINTENANCE PROCEDURES
This task covers:
a. Removal
b. Installation
INITIAL SETUP
Equipment Conditions
Tools and Special Tools (Cont)
Engine shut down (TM 9-2320-366-10-1).
Crowfoot Attachment, Socket Wrench (Item 10, Appendix
Tools and Special Tools
Personnel Required
Wrench, Torque, 0-175 lb-ft (Item 58,
(2)
a. Removal.
(1) Remove 12 screws (1) and washers (2) from machine
gun ring (3).
(2) Position three wooden blocks on cab roof (4).
WARNING
Machine gun ring assembly weighs
approximately 350 lbs (159 kgs). Attach a
suitable lifting device prior to removal.
Failure to comply may result in injury to
personnel or damage to equipment.
NOTE
Steps (3) through (7) require the aid of an
assistant.
(3) Position machine gun ring (3) on three wooden blocks.
(4) Re-position lifting device on machine gun ring (3).
Change 1