TM 9-2320-366-20-5
This task covers:
a. Disassembly
b. Assembly
c. Follow-On Maintenance
INITIAL SETUP
Equipment Conditions
Materials/Parts
LMHC control box power cable removed (TM 9-2320-
Dispenser, Pressure Sensitive Adhesive Tape
366-10-1).
(Item 20, Appendix D)
LMHC control box removed (TM 9-2320-366-10-1).
Lockwasher (2) (Item 104, Appendix G)
Lockwasher (4) (Item 115, Appendix G)
Lockwasher (2) (Item 116, Appendix G)
Tools and Special Tools
Tool Kit, Genl Mech (Item 46, Appendix C)
Gasket (Item 27, Appendix G)
Tool Kit, Auto Fuel (Item 43, Appendix C)
Terminal, Lug (2) (Item 279, Appendix G)
a. Disassembly.
(1) Remove eight screws (1), cover (2), and retainer (3) from
NATO plug (4).
NOTE
Tag wires and connection points prior to
disconnecting.
(2) Remove two screws (5), lockwashers (6), and terminal
lugs (7 and 8) from NATO plug (4).
Discard
(3) Remove terminal lugs (7 and 8) from wires (9 and 10).
Discard terminal lugs.
(4) Remove two grommets (11) from wires (9 and 10).
(5) Remove sleeve (12) from wires (9 and 10).
