TM 9-2320-366-20-5
20-67. LIGHT MATERIAL HANDLING CRANE (LMHC) CONTROL BOX REPAIR
(CONT)
(5) Install wires (12 and 13), gasket (15), and receptacle
(14) in control box (7).
(6) Position wire (12) through box connector (9).
(7) Install cap (16), four screws (17), lockwashers (18), and
nuts (19) in receptacle (14).
(8) Position wire (20) through box connector (10).
(9) Install wires (13 and 20) in circuit breaker (1) with two
screws (21).
(10) Tighten two nuts (22) on box connectors (9 and 10).
(11) Close cover (23) on control box (7).
(12) Install sleeve (24) on wires (12 and 20).
(13) Install two grommets (25) on wires (12 and 20).
(14) Install terminal lugs (26 and 27) on wires (12 and 20).
(15) Install wires (12 and 20) on NATO plug (28) with two
lockwashers (29) and screws (30).
(16) Install cover (31) and retainer (32) on NATO plug (28)
with eight screws (33).
20-372
