TM 9-2320-366-20-5
(4) Remove sheave (4), two detent plates (9), and washers
(10) from fly section (2).
(5) Remove bushing (11) from sheave (4). Discard bushing.
(6) Remove fitting (12) from sheave (4).
b. Installation.
(1) Install fitting (1) in sheave (2).
(2) Install bushing (3) in sheave (2).
(3) Position sheave (2), two washers (4), and detent plates
(5) in fly section (6).
(4) Install washer (7), screw (8), chain assembly (9), and
self-locking nut (10) in fly section (6).
WARNING
Wear leather gloves at all times when
handling winch cable. Do not allow cable
to slide through hands even with gloves
on. Broken wires may cause injury to
personnel.
(5) Install wire rope (11) in sheave (2).
(6) Install quick release pin (12) in fly section (6).
20-365
