TM 9-2320-366-20-5
CABLE REPLACEMENT
This task covers:
a. Removal
c. Follow-On Maintenance
b. Installation
INITIAL SETUP
Equipment Conditions
Materials/Parts
Batteries disconnected (para 7-57).
Ties, Cable, Plastic (Item 69, Appendix D)
PDP cover removed (para 16-2).
Lockwasher (Item 84, Appendix G)
Spare tire lowered (TM 9-2320-366-10-2).
Lockwasher (Item 96, Appendix G)
Bottom radiator fan shroud removed (para 6-4).
Nut, Self-Locking (2) (Item 153, Appendix G)
Tools and Special Tools
Tool Kit, Genl Mech (Item 46, Appendix C)
Wrench, Torque, 0-175 lb-ft (Item 58, Appendix C)
Wrench, Torque, 0-200 lb-in. (Item 59, Appendix C)
Socket Set, Socket Wrench (Item 34, Appendix C)
a. Removal.
(1) Remove three screws (1) and washers (2) from PDP (3).
(2) Remove three screws (4) from PDP (3).
(3) Lift PDP (3) outward to gain access.
NOTE
Remove plastic cable ties as required.
(4) Remove screw (5), lockwasher (6), terminal lug TL42 (7),
and four terminal lugs (8) from PDP (3). Discard
lockwasher.
(5) Position four terminal lugs (8) on PDP (3) with screw (5).
