TM 9-2320-366-20-5
(3) Position terminal lugs TL166 (4) and TL1 (5) on terminal
block terminal (6) with washer (7), lockwasher (8), and
nut (9).
(4) Tighten nut (9) to 15-19 lb-ft (21-25 Nm).
(5) Install dust boot (10) on 200 amp terminal block to
reverse polarity relay 24 vdc battery cable (2).
(6) Position terminal lug TL169 (11) on reverse polarity relay
24 VDC BAT terminal (12) with lockwasher (13) and nut
(14).
(7) Tighten nut (14) to 30 lb-ft (41 Nm).
(8) Position dust boot (10) on terminal lug TL169 (11).
(9) Position turbocharger intake hose (15) on intake air
cleaner boot (16) with clamp (17).
(10) Tighten clamp (17) to 36-48 lb-in. (4-5 Nm).
20-311
