TM 9-2320-366-20-5
20-56. 200 AMP TERMINAL BLOCK TO REVERSE POLARITY RELAY 24 VDC BATTERY
CABLE REPLACEMENT (CONT)
(6) Remove nut (10), lockwasher (11), washer (12), and
terminal lugs TL1 (13) and TL166 (14) from terminal
block terminal (15). Discard lockwasher.
(7) Remove 200 amp terminal block to reverse polarity relay
24 vdc battery cable (9) from rear side of front lifting
beam (16).
(8) Remove convoluted tubing (17) from 200 amp terminal
block to reverse polarity relay 24 vdc battery cable (9).
b. Installation.
NOTE
Install plastic cable ties as required.
(1) Install convoluted tubing (1) on 200 amp terminal block
to reverse polarity relay 24 vdc battery cable (2).
(2) Position 200 amp terminal block to reverse polarity relay
24 vdc battery cable (2) on rear side of front lifting beam
(3).
20-310