TM 9-2320-366-20-5
This task covers:
a. Removal
c. Follow-On Maintenance
b. Installation
INITIAL SETUP
Equipment Conditions
Materials/Parts
Spare tire lowered (TM 9-2320-366-10-2).
Ties, Cable, Plastic (Item 69, Appendix D)
Cab raised (TM 9-2320-366-10-1).
Lockwasher (Item 96, Appendix G)
Batteries disconnected (para 7-57).
Lockwasher (Item 105, Appendix G)
Tools and Special Tools
Tool Kit, Genl Mech (Item 46, Appendix C)
Wrench, Torque, 0-175 lb-ft (Item 58, Appendix C)
Wrench, Torque, 0-200 lb-in. (Item 59, Appendix C)
Socket Set, Socket Wrench (Item 34, Appendix C)
a. Removal.
(1) Lift dust boot (1) on terminal lug TL2 (2).
NOTE
Remove plastic cable ties as required.
(2) Remove nut (3), lockwasher (4), washer (5), fuse (6),
and terminal lugs TL2 (2) and TL8 (7) from alternator
terminal (8). Discard lockwasher.
(3) Remove alternator to terminal block 24 vdc cable (9)
from dust boot (1).
(4) Loosen clamp (10) on turbocharger intake hose (11).
(5) Remove turbocharger intake hose (11) from intake air
cleaner boot (12).
