TM 9-2320-366-20-5
20-50. 200 AMP ALTERNATOR TO TERMINAL BLOCK 24 VDC CABLE REPLACEMENT
(CONT)
(4) Position terminal lugs TL166 (7) and TL1 (8) on terminal
block terminal (9) with washer (10), lockwasher (11), and
nut (12).
(5) Tighten nut (12) to 15-19 lb-ft (21-25 Nm).
(6) Position turbocharger intake hose (13) on intake air
cleaner boot (14) with clamp (15).
(7) Tighten clamp (15) to 36-48 lb-in. (4-5 Nm).
(8) Install 200 amp alternator to terminal block 24 vdc cable
(2) in dust boot (16).
(9) Position terminal lugs TL8 (17) and TL2 (18) on
alternator terminal (19) with fuse (20), washer (21),
lockwasher (22), and nut (23).
(10) Tighten nut (23) to 144-192 lb-in. (17-21 Nm).
(11) Install dust boot (16) on terminal lug TL2 (18).
20-288