TM 9-2320-366-20-5
CABLE REPLACEMENT
This task covers:
a. Removal
c. Follow-On Maintenance
b. Installation
INITIAL SETUP
Equipment Conditions
Materials/Parts
Spare tire lowered (TM 9-2320-366-10-2).
Ties, Cable, Plastic (Item 69, Appendix D)
Cab raised (TM 9-2320-366-10-1).
Lockwasher (Item 73, Appendix G)
Batteries disconnected (para 7-57).
Lockwasher (Item 96, Appendix G)
Tools and Special Tools
Tool Kit, Genl Mech (Item 46, Appendix C)
Wrench, Torque, 0-175 lb-ft (Item 58, Appendix C)
Wrench, Torque, 0-200 lb-in. (Item 59, Appendix C)
Socket Set, Socket Wrench (Item 34, Appendix C)
a. Removal.
(1) Loosen clamp (1) on turbocharger intake hose (2).
(2) Remove turbocharger intake hose (2) from intake air
cleaner boot (3).
(3) Lift dust boot (4) on terminal lug TL168 (5).
NOTE
Remove plastic cable ties as required.
(4) Remove nut (6), lockwasher (7), and terminal lug TL168
(5) from reverse polarity relay 24 VDC LOAD terminal
(8). Discard lockwasher.
(5) Remove dust boot (4) from 200 amp terminal block to
reverse polarity relay 24 vdc load cable (9).
