TM 9-2320-366-20-5
This task covers:
a. Removal (All Models Except M1093/M1094)
d. Installation (M1093/M1094)
b. Installation (All Models Except M1093/M1094)
e. Follow-On Maintenance
c. Removal (M1093/M1094)
INITIAL SETUP
Equipment Conditions
Material/Parts
Spare tire lowered (TM 9-2320-366-10-2).
Dispenser, Pressure Sensitive Adhesive Tape
Batteries disconnected (para 7-57).
(Item 20, Appendix D)
Ties, Cable, Plastic (Item 69, Appendix D)
Lockwasher (2) (Item 72, Appendix G)
Tools and Special Tools
Tool Kit, Genl Mech (Item 46, Appendix C)
Lockwasher (2) (Item 73, Appendix G)
Wrench, Torque, 0-175 lb-ft (Item 58, Appendix C)
Nut, Self-Locking (2) (Item 155, Appendix G)
Wrench, Torque, 0-200 lb-in. (Item 59, Appendix C)
Socket Set, Socket Wrench (Item 36, Appendix C)
a. Removal (All Models Except M1093/M1094).
NOTE
Tag cables and connection points prior to
disconnecting.
Remove plastic cable ties as required.
(1) Lift dust boot (1) on terminal lug TL174 (2).
(2) Remove nut (3), lockwasher (4), and terminal lug TL174
(2) from reverse polarity relay 12V LOAD terminal (5).
Discard lockwasher.
(3) Lift dust boot (6) on terminal lug TL173 (7).
(4) Remove nut (8), lockwasher (9), and terminal lug TL173
(7) from reverse polarity relay 12V BAT terminal (10).
Discard lockwasher.
