TM 9-2320-366-20-5
(21) Remove nut (29), lockwasher (30), and washer (31) from
alternator terminal (32).
(22) Position terminal lug TL60 (33) on alternator terminal
(32) with washer (31), lockwasher (30), and nut (29).
(23) Tighten nut (29) to 156-180 lb-in. (17-21 Nm).
(24) Position dust boot (34) on terminal lug TL60 (33).
(25) Remove nut (35), lockwasher (36), washer (37), and fuse
link (38) from alternator terminal (39).
(26) Position fuse link (38), terminal lugs TL2 (40) and TL6
(41) on alternator terminal (39) with washer (37),
lockwasher (36), and nut (35).
(27) Tighten nut (35) to 156-180 lb-in. (17-21 Nm).
(28) Position dust boot (42) on terminal lug TL6 (41).
c. Follow-On Maintenance.
(1) Install alternator belts (para 7-3).
(2) Connect batteries (para 7-57).
(3) Start engine (TM 9-2320-366-10-1).
(4) Check VOLTS gage for charge indication (TM 9-2320-
366-10-1).
(5) Shut down engine (TM 9-2320-366-10-1).
End of Task.
Change 1
20-267
