TM 9-2320-366-20-5
(15) Remove two self-locking nuts (26), screws (27), and
reverse polarity relay (28) from brackets (29 and 30).
Discard self-locking nuts.
(16) Remove screw (31) and lockwasher (32) from bracket
(30). Discard lockwasher.
(17) Remove self-locking nut (33), screw (34), and bracket
(30) from spare tire retainer (35). Discard self-locking
nut.
(18) Position screw (34) and self-locking nut (33) in spare tire
retainer (35).
(19) Tighten self-locking nut (33) to 43-51 lb-ft (58-69 Nm).
(20) Position lockwasher (32) and screw (31) in rear support
brace (36).
(21) Tighten screw (31) to 43-51 lb-ft (58-69 Nm).
20-249
