TM 9-2320-366-20-5
This task covers:
a. Removal
c. Follow-On Maintenance
b. Installation
INITIAL SETUP
Equipment Conditions
Materials/Parts
Batteries disconnected (para 7-57).
Ties, Cable, Plastic (Item 69, Appendix D)
PDP cover removed (para 16-2).
Nut, Self-Locking (Item 172, Appendix G)
Tools and Special Tools
Tool Kit, Genl Mech (Item 46, Appendix C)
Wrench, Torque, 0-200 lb-in. (Item 59, Appendix C)
Wrench, Torque, 0-175 lb-ft (Item 58, Appendix C)
Wrench Set, Socket (Item 51, Appendix C)
a. Removal.
(1) Remove three screws (1) and washers (2) from PDP (3).
(2) Remove three screws (4) from PDP (3).
(3) Lift PDP (3) outward to gain access.
NOTE
Remove plastic cable ties as required.
(4) Disconnect connector PX22 (5) from wiper motor (6).
(5) Remove self-locking nut (7) and washer (8) from wiper
motor (6). Discard self-locking nut.
NOTE
Note orientation of wiper arm prior to
removal.
(6) Remove wiper arm (9) from wiper motor (6).
