TM 9-2320-366-20-5
This task covers:
a. Removal
d. Installation
b. Disassembly
e. Follow-On Maintenance
c. Assembly
INITIAL SETUP
Equipment Conditions
Materials/Parts
Engine shut down (TM 9-2320-366-10-1).
Washer, Spring (Item 292, Appendix G)
Wiper, Refill (Item 297, Appendix G)
Tools and Special Tools
Tool Kit, Genl Mech (Item 46, Appendix C)
Wrench, Torque 0-200 lb-in. (Item 59, Appendix C
Socket Set, Socket Wrench (Item 51, Appendix C)
a. Removal.
NOTE
All windshield wipers are removed the same
way. Left side shown.
(1) Disconnect windshield washer hose (1) from fitting (2).
(2) Lift cover (3) at base of wiper arm (4).
(3) Remove nut (5) and spring washer (6) from wiper arm
shaft (7). Discard spring washer.
NOTE
Mark position of wiper arm prior to removal.
(4) Remove wiper arm (4) from wiper arm shaft (7).
Change 1
